Prepping for engine install

Firstly a big thanks to Derek at Caterham for all the packages I have been receiving.... It's like Christmas.

Over the last couple of nights I have been prepping for the engine installation, including:

Cutting down the end of an Allen key to glue in the sump plug.

Attaching the engine mounts 

Plugging the speedo take offs on the gearbox.

Attaching the gearbox mount.

I also ran a cable along the harness to use for the oil temp. I will mount a switch on the dash and use it to select the between the oil and water temp sensors and display either on the temp gauge.